atcomsystems.ca/forum
Posted By: junkman Toshiba iES32 notification - 05/03/05 04:42 PM
OK, what am I doing wrong here...

Trying to set up cell phone notification, selected 'voice home' type, put in cell number, didn't work. Added 9 in front of number, still didn't work. Remembered they're on centrex, added second 9 in front of number, still doesn't work. What am I missing?
Posted By: phonemeister Re: Toshiba iES32 notification - 05/03/05 11:03 PM
On the Stratagy Admin do you see a port go offhook to notify? Try monitoring the trunk with a buttset during a notification. Could be that the Stratagy is dialing too fast as I've had that happen before on 'dial 9' centrex lines with direct trunk access without LCR. If that's the case, you can increase time between dialing digits in the Stratagy. However, if you hear the Stratagy go offhook and then immediately back onhook without dialing any digits, then you'll need to apply the notification patch.
Posted By: junkman Re: Toshiba iES32 notification - 05/04/05 09:27 PM
Had to delete the mailbox (new vm, nothing lost) and recreate, with one 9 before the cell #. Also increased the answer delay time from 10 to 30 seconds.


[This message has been edited by junkman (edited May 04, 2005).]
© Sundance Business VOIP Telephone Help