Woundering if anybody has worked on putting a T1 into an FX where the carrier was providing the T1 from a Nortel DMS10. We are trying to configure our DMS10 to work with the FX and need some translations config. on the DMS10 side
What do you need to know? T1 or PRI? If it's a standard T1 then just have E&M or E&M DNIS,Wink Start,B8ZS,ESF and you should be good to go.
It was T1 not PRI and we found out that on a DMS10 we had to create 2 trunk groups 1 for incomging and 1 for outgoing. To my understanding only PRI and be created for 2-way unlike T1 we you have to chhose how many incoming and how many outgoing you will need.