|
|
|
|
Joined: Jan 2006
Posts: 15
Member
|
OP
Member
Joined: Jan 2006
Posts: 15 |
Woundering if anybody has worked on putting a T1 into an FX where the carrier was providing the T1 from a Nortel DMS10. We are trying to configure our DMS10 to work with the FX and need some translations config. on the DMS10 side
K. Janssen
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
What do you need to know? T1 or PRI? If it's a standard T1 then just have E&M or E&M DNIS,Wink Start,B8ZS,ESF and you should be good to go.
|
|
|
|
|
Joined: Jan 2006
Posts: 15
Member
|
|
OP
Member
Joined: Jan 2006
Posts: 15 |
It was T1 not PRI and we found out that on a DMS10 we had to create 2 trunk groups 1 for incomging and 1 for outgoing. To my understanding only PRI and be created for 2-way unlike T1 we you have to chhose how many incoming and how many outgoing you will need.
K. Janssen
|
|
|
|
Forums84
Topics94,293
Posts638,827
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
98
guests, and
206
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)