Hi

Can anyone help me i need to set up the DCS for call logging to a PC. What wiring is involved and what programming steps do i need?

Many thanks in advance

Joe

In your manual look for "SMDR" options in MMC725, "Customer On/Off" in MMC 300.

I don't know what the DCS Compact 2 equates to over here, maybe a 616 or a 100 but in any case you would hook up a serial port to your PC.

Your manual should show you the pinouts.

Joe,
You need a MISC1 or MISC2 card in the system. The default setup is SMDR on port 2, 9600 8N1. This can be changed in the MMC 'System I/O Parameter'.

Bunnie,
I think the UK Compact II is more akin the the US 50si, the UK DCS-816 is similar to the US DS-616 or iDCS16.

Tom