I have a remote IP phone (only one on the system) I have dial tone but when I try to dial I get no MGI channels available. I have an OAS card and it is set to MGI 16. I see 16 idle MGI channels not sure what I missed and where.
TIA,
John

Did you put the channels in the mgi group?
7100/7200s are already numbered at default, 7200 and 7400 are not. I miss it almost every time.

you will also need to assign OAS card as MGI chnnls(MMC 858) then no. them in MMC724 and grp them in MMC614