Happy New year all.

We recently replaced processor cards and loaded latest software on a couple of systems and noticed the 4TRM modules won't work on the existing UNI card. Needed to install new UNI cards. Is this a result of a newer processor or newer software? I'm guessing it's the processor. And does anyone have info on card version compatibilty?

Thanks!

I have had the same issue changing from MP10 to MP10a with the older 4SLM modules on older v4 UNI cards (no ringing) changed to a v5 UNI and the card works again. I believe its the newer processor causing the issues.

And old Samsung bulletin had this issue with the MP20s using v4 UNI cards as that also needed a new v5 UNI card.

V4 Uni cards are upgradable to v5, you just need the cable, software, cpld file and procedure. It takes seconds to upgrade once setup.

The same applies to the os7030 cpld, and likely other cards.

Thanks all.

Nameless can you PM me the info. on the upgrade to v5? I would like upgrade several cards. Is the cable just a header and serial cable or does it have some buffer hardware on it. If so where can I get one?

PM Sent

Nameless can you PM me the info. on the upgrade to v5? I would like upgrade several cards. Is the cable just a header and serial cable or does it have some buffer hardware on it. If so where can I get one?
Thanks

Hi Nameless ,
I'm interested too for this procedure ,can you PM the info ?

Thanks

Pm sent to both

Hi Nameless can you PM me also

Just so everyone knows, to-do the upgrade requires a special cable. It's not one you can make, you'll have to purchase it. I don't know where you get it from.

Same,
Nameless could u please send me a pm as well.

Thanks.

Hi all can you please PM me also. Ty you so much

I can do the mp10a v2 i just dont know how to do the uni v5 update.

It's very similar to the os7030 cpld procedure i sent you.

Nameless - would you mind sending me the procedure as well? Thanks.

Hi Nameless

Could I ask you to PM me the info also please.

Thanks

nameless, can you send me to procedure too? Thanks!

Hi Nameless, could you send me the procedure too? Coming up against this a lot recently.

Hi Nameless, can you PM me also. Thanks

PM's sent to everyone i believe.

Nameless,

I never got it, could you resend plz.
thanks.

Looks like I missed someone.
PM Sent

Can I get that info about the UNI card firmware upgrades? I have a few cards I need to get to V5.
Thanks!