On the Merlin Legned System on Analog stations I went to Ext -> VoiceSignl -> EXT # -> enter the number but doesn't voice when station is busy. Does anyone know if I missed a step or if I have to do anything else to get Voice Ann. to work.
If its a single line analog phone it will not receive voice pages. It needs to be a system phone.
Hope this helps
dtmf
They are analog voice terminal (bis 10, bis 34).
by default your second key will be voice annc. What release is the Legend? You should have MLX phones
[This message has been edited by mpoe (edited 07-23-2001).]
On the legend system with analog phones you have to use 2 station ports in order to use voice anounce to busy. The ports have to be next to each other (example phone on ID 12; anouncement port has to be ID13. It has been awhile since I have done this but I believe the wbr/brw pair has to be wire to the t/r of the anouncement port. Hope this help you.