HI! I can't get Analogue ports to ring on C.O. Calls works on intercom ringing, it is a Partner version Sd , R6.0 IPO 500 ihave the ringing on for the X26 , and have have tried different analogue tel.'s like my butt set and another panasonic Sli set . This is new system , i know i should upgraded it right. Any suggestions??Thanks

Yeah, that is something that we have been hearing that should be fixed in a future maintenance release.

If you are using a ETR card, you could move the analog stations to the ETR as a work around.

I havent tried it yet, but try forwarding a port that rings to the analog extension. In theory it should work.

Thanks Mdaniel and mango good point.

QUESTION ,I have a ip500 v2 Essential with combo card upgraded software R7.0(5) and the analogue ports ring on C.O. calls ?,,#2 ip500 v2 Partner with same version software with separate 2phone module dosen't ring on C.O calls ?? Just thought i would bring that out ?? Thanks

I just went through this same thing....The IPO Partner edition will not ring analog stations on CO calls except on ETR cards. My fix was to upgrade the customer to a full IPO essential edition which utilized the same hardware but not works!

Todd