Anyone know how to reset config pword for an 8x24

IF this is truely an old 8x24 copper than You will need to use a Remote Access Device (RAD) not a FAST RAD and the software to gain access to the KSU. If its an MICS than you can use a RAD. Nortel publishes helpful guides on how to accquire one. Other than that you will have to go to Nortel TECH Support.

Loc,

There is a way to do it by changing the date back and doing xftest. I can't think of it right now but I'll get it tomorrow and send it to you.

Chris

that would be so much help chris