|
|
Joined: Mar 2004
Posts: 253
Member
|
OP
Member
Joined: Mar 2004
Posts: 253 |
Anyone know how to reset config pword for an 8x24
|
|
|
|
|
Joined: Mar 2005
Posts: 2
Member
|
|
Member
Joined: Mar 2005
Posts: 2 |
IF this is truely an old 8x24 copper than You will need to use a Remote Access Device (RAD) not a FAST RAD and the software to gain access to the KSU. If its an MICS than you can use a RAD. Nortel publishes helpful guides on how to accquire one. Other than that you will have to go to Nortel TECH Support. <font face="Verdana, Arial" size="2">Originally posted by locg:
Anyone know how to reset config pword for an 8x24</font>
|
|
|
|
|
Joined: Feb 2003
Posts: 177
Member
|
|
Member
Joined: Feb 2003
Posts: 177 |
Loc,
There is a way to do it by changing the date back and doing xftest. I can't think of it right now but I'll get it tomorrow and send it to you.
Chris
|
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
|
OP
Member
Joined: Mar 2004
Posts: 253 |
that would be so much help chris
|
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
