atcomsystems.ca/forum
Posted By: emmitt27 night ringing - 09/19/07 03:26 PM
I have an older DR% software 8x24. They want to add several phones to ring at night. I poked around in programming for awhile and was unable to find anything. So I grabbed manual. It says under heading 6. Service modes I should see
Control Telephones
Name
Setting
Trunk answer
Extra-dail
Ringing telephones
aux ringer

When I scroll through the list, it jumps to
7. Passwords right after extra dial. Does this mean I can't add ringing phones?
Posted By: MooreTel Re: night ringing - 09/19/07 05:43 PM
Sounds like your manual isn't for the software installed, so in my opinion (& it ain't worth much), I'd say no.

Dave
Posted By: telemarv Re: night ringing - 09/20/07 05:28 AM
On the campact and modular service modes are in the admin level. But if memory serves me right you must be DR4 and up. Post yout SP number.
Posted By: phoneguy1962 Re: night ringing - 09/20/07 01:27 PM
Didn't Nortel have a unitised 8X24 befor the 0X32 came out. I think it also had a software desi of DR X. If I remember right, it's been awhile, night ring was under admin and was labled Night Ring. Just reaching here don't take as gospel
© Sundance Business VOIP Telephone Help