(MICS w/7.1 software). Not working on any line. Change it to ring 2-4, release out of programming and when I go back into the programming, its back to None.
pts: You can only assign a D-Ring to one item. (otherwise it would not be distinctive) It could be that the numbers 2-4 may already be assigned somewhere else. Check Hunt Groups, Answer DN things like that.
NTlayoff - Defaulted a MICS with two phones on the system. Changed nothing on the extensions (distintive ring) and still if I change the DS on any line (only gives me choices 2-4) and after exiting programming and going back in, its back to None.
----- From the manual 7.1: If the ring type is changed on a telephone after the DRPs are set on the line, the line DRPs are overwritten by the telephone settings. If the line DRPs are set after telephone programming, then the telephone ring programming is overridden by the DRP. Refer to the Modular ICS System Administrator Guide for details about setting ring types on a telephone. ------
However if the number is being used under a Line it wont let you choose it in F*7 anyway.