atcomsystems.ca/forum
Posted By: backa1 TD816al with cordless - 09/14/07 08:07 AM
The td 816 works fine but put a kx-tg2622al cordless phone on it and its playing up. It works fine directly on the pstn and voip lines but once on the the system I get a lot of extra sidetone(feedback) the person on the other end does not notice it. Its only at the system end. Is this normal or is there is something I can program to turn it down.
Posted By: peter doyle Re: TD816al with cordless - 09/14/07 10:27 AM
1. make sure the digital pair of wires are not connected inside the wall socket.
2.use the port in xdp mode
3 make sure the flat flex from the portable is a single pair of wires

it often happens that fax machines and modems have problems when connected to the KXTD for the above reasons
Posted By: backa1 Re: TD816al with cordless - 09/15/07 05:38 AM
Thanks for that will check tomorrow.
Posted By: backa1 Re: TD816al with cordless - 09/19/07 04:42 AM
Yeap that seems to have fixed my problems thank you
Posted By: peter doyle Re: TD816al with cordless - 09/19/07 04:54 PM
no problem


peter (www.novacomms.net)
© Sundance Business VOIP Telephone Help