I'm getting a Parameter error MSG when I try and download info from a TD1232 R3 with my PPD1232 software. It works fine on a R6 KSU. Any ideas
BTW it does show that I'm connected as well.
you need the r3 tool, extra options in r6 and is getting an error because it is not receiving them from r3 system
Thanks OBT. I'll get that loaded.
OK OBT can you tell what Version I am looking for. So far all we have here at the shop is V1.04 and that's what is on the BTS site.
Thanks
Goldenhtr, on the KX-TD 1232 the programming software is backwards compatible.
Version 6 programming should work on a version 3.
You are referring to the DOS software and not the windows correct?
You do know that you can also program that through a display set?
------------------------
MrG
If using Xp, sometimes there are connection problems. There are settings to work with in additional settings. See the the help, (F4), in the DOS tool.
Over here the dos software will only work on the same version system I have to have all 6 on the pc. The windows tool only works with 5-6 with out errors
MrG we are using the windows version. But also tried the DOS as well and still got the same error. Both work fine on the V6 KSU. Yes we ended up using the phone to fix the problem. The thing is I would like a backup, as we want to upgrade them to a TDA. Then I can at least read what they have now for programing off site while I build their new system.
Tinker with timing in Additional features for XP,
this usually works for me. The port may be bad also.
Did not want to leave this haning. But still no luck. Tring to find a copy of V1.0 to try out.
Has anyone used the full version of this TD1232 program
https://www.pbxsoftware.com/winprog/order.shtml The trial version works fine to read data in the old v3 td1232, you just can't upload unless you buy the full version. Boss wants to know if it is worth it.
I think brokeda is probably correct when he said the com port on the ksu is bad. I have seen the problem before. Try connecting to the ksu with hyperterm, 9600,n,8,1, and see if you can see the smdr. If not then you definitely have a faulty com port.
I have been certified since 12 / 94
and have accumilated a full deck of cards (dos disks) kx-a271 /1232-0 ,kx-a271 v3.00 / 1232-0
kx-a271 v3.13 /1232-1 , kx-a271 v3.21 / 1232-1
kx-a271 v3.33a3 /1232-2 ,kx-a271v3.55a4 / 1232-3
kx-a271 v3.4a4 / 1232-3 / 1232-4 /kxa271v5.00a6 /1232-5
if you need a copy send me a pm
Some versions DOS KX-A271 for KX-TD1232 you can find here (mostly newer European/Russian models CE RU NZ SA, NL, SP, JT and older models BX DBX X AG ML TDN CN NZ HK KX ):
http://housecomputer.ru/devices/pbx/panasonic/panasonic.htmlhttp://www.telemonter.narod.ru/prog/panas/index.htmlhttp://www.wint.it/assistenza/tes-tea/kx-td/
This is 8 years old tread