Here's the whole story-
I have a customer who wants me to install their new CTX100,purchased by their HQ for all offices, along with the new cabling I am installing. Normally, I don't work Toshiba, and have been seeking training. This looks like a good place to start.
They have a Merlin 410 coming out, and the new CTX100 for 4 lines 8 stations going in. I have seen the unit, and the cards were plugged in before shipping- a 4 line card, an 8 station card, and processor. I've been told that there is a default configuration on it, as in most systems, where all lines appear and ring on all stations.
I have the manuals, (THANKS SUNDANCE!) but also have a chance to buy a copy of the winadmin software. The guy selling it says I need a "do" license" though. I believe all I will need to do is to change the ringing on some phones, if any programming needs done at all. I can do this with a set, I believe, if I don't get the software.
questions-
1. Am I correct in that there is a default config, since it was shipped already loaded?
2. what is a "do license"?
3. Can I use a 3010-s set to program, if need be?
