|
|
Joined: Aug 2005
Posts: 560
Member
|
OP
Member
Joined: Aug 2005
Posts: 560 |
I've got a stratagy IVP8 in a CTX100 that was installed a few years ago. I haven't been in the system for quite a while, but need to get in now and add a mailbox.
The old PC with serial port I used to use died some time back, so I am trying to access the unit with a USB to serial converter and the R4 admin program. I know I have the USB device on the correct COM port - but when I run the admin program and enter the password (default used) I get a response that the system is unable to connect to the modem?
The only thing I am doing different here is using a different PC with the USB-serial converter. The cable to the IVP8 is the same as I used before, and I am pretty sure I was using this install of the admin program (although I am not 100% sure what version I had on that old PC)
Wondering if anyone has any suggestions of what to check or perhaps a different approach...........before my nervous breakdown.
Thanks! :scratch:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
142
guests, and
316
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|