OK the 6 trunk card requires only version 1.1 or later software.I have never seen a bulletin regarding software versions and 8 dli cards.
There was a service bulletin that referred to the 2x4 cards I believe in the iDCS 100 expansion cabinet.And the problem affected the 3rd slot in the expansion cabinet.Try installing the card that is giving you trouble in another slot that you have a working dli card in, ie switch 2 cards.This will tell you if you have a bad card(seen that take an entire system down before).Could also be a bad expansion cabinet slot.I would also try removing all the expansion cards and install only the new dli card again into a slot that had a dli card.If the system doesn't run then you know it's that card causing the problem.



[This message has been edited by pvj (edited August 28, 2003).]