|
|
Joined: Mar 2005
Posts: 97
Member
|
Member
Joined: Mar 2005
Posts: 97 |
No. You need to RDP or console into the callpilot to change the IP. I would suggest using console since RDP will disconnect when the change is made and you will have to get back in for the next step.
Afterwards you will need to reboot. It is always a good idea to run through the config wizard after making such a change and in this instance you would need to do that on the call pilot itself using the local loopback to connect the callpilot manager. It is suggested that you reload the language packs (at the end of config wizard) to reset all of the DSP's.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,321
Posts638,962
Members49,779
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
186
guests, and
72
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|