|
|
Joined: Jul 2003
Posts: 1,231
Member
|
OP
Member
Joined: Jul 2003
Posts: 1,231 |
can i change the call pilot voicemail ip address with telephone programing. thanks dave
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
None that I have found.
Connect with laptop. Change it, then you will have to reboot.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Mar 2005
Posts: 97
Member
|
Member
Joined: Mar 2005
Posts: 97 |
No. You need to RDP or console into the callpilot to change the IP. I would suggest using console since RDP will disconnect when the change is made and you will have to get back in for the next step.
Afterwards you will need to reboot. It is always a good idea to run through the config wizard after making such a change and in this instance you would need to do that on the call pilot itself using the local loopback to connect the callpilot manager. It is suggested that you reload the language packs (at the end of config wizard) to reset all of the DSP's.
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
I dont think that applies to the 100/150 as they do not support RDP. 100/150 is via Serial or GUI only.
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
59
guests, and
323
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|