|
|
Joined: Jan 2017
Posts: 11
Member
|
OP
Member
Joined: Jan 2017
Posts: 11 |
We were hired by a new client to facilitate a cut over from AT&T GS/trunks to a newly installed Fiber IP Flex Circuit. When we put the new lines in we were unable to make outgoing calls. They were getting incoming calls but no outgoing. When we accessed the assigned line buttons there was no dial tone. The port card in the system is a 408 GS/LS card. My question is...would there need to be a programming change in the system if we are going from GS to LS trunks? Thank you in advance.
Last edited by tmnewton; 02/11/17 01:34 PM.
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
180
guests, and
356
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|