Hi,

We have a Samsung phone system installed and a BT line on which ADSL is enabled. I'd like to connect the BT line to the PBX, and know that I need to basically connect in a microfilter like this:

BT Line ---> Microfilter Analogue Phone Port ---> Samsung PBX
|
|
|--------->Microfilter ADSL Port----> ADSL Modem

I've stripped back the wires on a the Microfilter and I've got a red and a green wire, do I connect these to the two wires that provide the BT line (which terminates in an 'NTTU'), if so, does it matter which way around?

I've then plugged a phone lead into the analogue phone port on the Microfilter and stripped back the wires on this to find another pair of red and green wires. So do I then plug these into my phone system's board?

Any help would be appreciated, many thanks!

Mark

------------------
No matter where you go,
there you are!

No matter where you go,
there you are!