|
|
Joined: Feb 2010
Posts: 339
Member
|
OP
Member
Joined: Feb 2010
Posts: 339 |
I have options 71 & 72 set to 2 in Form 4 Form 18 is programmed Nothing Programmed in Form 19 MOH works internally
When connected through PRI any call put on hold gets a loud high pitched whine. Have replaced the following: MCC BCC II IAD2400
Not sure where to go from here. Customer has their customers hanging up when placed on hold because they think they are getting transferred to a fax or because it's just that damn annoying.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
Member
Joined: Apr 2007
Posts: 339 |
may not be applicable but here this is from a Mitel product bulletin:
Options 71 and 72 must correspond to the type of FIM or CIM card installed. A triple FIM card can be identified by the part number [see below] or the factory mounted fiber connections on the front of the card. A triple FIM has 4 fiber connections on the front edge and a connection socket on the rear for the third bay. Even if the extra module is not installed, this is still a triple FIM. For the triple FIM card, Option 71 or 72 must be set to 3 to correctly assign the links.
Control triple CIM cards have a dip switch [switch 4] that must match the programming in Option 71 or 72.
PRI cards installed in the control cabinet, emulating either bay 2 or 4, must have Option 71 or option 72 set for 2.
The Triple FIM part numbers are as follows:
9109-613-001-NA 9109-613-002-NA 9109-613-003-NA
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
Member
Joined: Sep 2008
Posts: 392 |
How is the PRI programmed, bay, slot etc.? Is it in the Main Control cabinet?
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
OP
Member
Joined: Feb 2010
Posts: 339 |
Main control cabinet slot 11 just one circuit so bay 4 slot 6 ccts 1-23
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
98
guests, and
317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|