|
|
|
|
Joined: Nov 2005
Posts: 86
Member
|
OP
Member
Joined: Nov 2005
Posts: 86 |
I will be putting in two PRIs in a MICS. I have done several of these with only one PRI.
What will be different. I will want them to dial out 9 as you would with one. But will the programming be the same? I believe i need only one enabler for this.
Thanks in advance.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Enable both of them in maintenance. You should be good to go. Once the cabinet is enabled that is all you need for the PRi.
I would be sure to have the ID code written down on a label. If the cabinet dies, you may need to have the code restored on another cabinet.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
80
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
