|
Joined: Aug 2006
Posts: 131
Member
|
OP
Member
Joined: Aug 2006
Posts: 131 |
We are an NEC dealer that recently moved a PANI D308 Digital Hybred System for a customer. Of coarse we were told that no programming would be involved as we don't have a program manual. My question is this: On the back of the digital phones there is a jack that says "To Tel" I plugged a cordless phone into that jack but the cordless wouldn't work. Do I need an adaptor or something? Or is it progamming? Thank you.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2007
Posts: 1,217
Member
|
Member
Joined: Jan 2007
Posts: 1,217 |
No adaptor, xdp (extra device port) needs to be enabled in programming for that extension's port.
Aaron
|
|
|
|
Joined: Jan 2007
Posts: 2,116 Likes: 2
Admin
|
Admin
Joined: Jan 2007
Posts: 2,116 Likes: 2 |
You also need all 4 wires (2 pairs) between the system and the telephons socket.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Aug 2006
Posts: 131
Member
|
OP
Member
Joined: Aug 2006
Posts: 131 |
That's great. They'll be happy they don't need additional equipment. Now, can someone point me in the right direction as to how to enable this? Thank you.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
WJS, on the TD308 only the 1st 4 ports supported the XDP feature or parallel connections. The XDP, (extra device port) when activated, becomes a seperate extension. If it was on one of the 1st four ports, you should have had intercom dialtone if it was properly wired from the system to the station jack. There was an add-on module for SLT on the last 4 ports. KX-TD30870 ----------------- MrG
|
|
|
|
Joined: Aug 2006
Posts: 131
Member
|
OP
Member
Joined: Aug 2006
Posts: 131 |
Thanks for all the responces. This happens to be on the 4th port and the didital phone works fine. However the cordless I have plugged in to the parallel port doesn't work. Does something need to be activated in programming?
|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
Member
Joined: Mar 2008
Posts: 89 |
yes if you need xdp to work than go to pgm 600 press spkr 4 times press auto answer once then autodial/store then hold then program and as obt said the jack has to have all four pins cutdown all the way back to the frame.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
WJS, only activate the XDP, (program 600) if you want that cordless to be a seperate extension. If your simply looking for a parallel connect, then don't activate it. Again, either way, you will need two pair, complete from the jack to the system. ------------------- MrG
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
157
guests, and
221
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|