atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems MDN Group

You to fast for me. I edited my post look above again.

And On fixxing the cfg, No way to fix it to my knowledge. and yes you will lose all the personal speed dials

E-mail me the cfg, I will try it on my e-manger. or try upgrading the e-manger before going through all that hassel.

One time I had trouble reprograming a modm and it was a problem with th e-manger. They fixed it in the lastest version. You never know. Maybe this was a problem too.

I am just wondering if I re create it and copy everything, do I have to walk around to every phone and cfna to voice mail, have everyone reprogram their phone with personal speed dials, reprogram all call forwards, etc..? is it something I have to do all over again for every phone?

Look above Again, I edit again. You can CFNA, and do memory keys right from the e-manger. Personal Speed dials they would have to put in.

This was my problem, I had to move my ocd to another slot because I put the TVSE card in. Then when I transfer the unit over they went over fine. when I deleted the Modem to put it on the MPD2 card it wouldn't let me. The problem turned out to be that the modem I couldn't program when an OCD was programed in that slot. Had to move the OCD to another slot and then I could reprogram the Modem in the MPD2 card.

So look at the last thing you did in programing and try to reveres it. Maybe that will work for you.

Erik
You still have Rel 7 right? Try backing up with 7.33b PCP (Dos) and see if you can add the MDN.