Incoming calls via PRI. One particular incoming number is for emergencies. Rings at multiple phones using hunt group in day mode, goes to one station in night mode that is CFOS'ed. All works OK. Now the customer wants to be able to CFOS in day mode as needed. Since I cannot cfos a hunt group I could send the number to one station in day that can be cfos whenever the customer desires. However, when the station is not cfos'ed can I have it ring at multiple stations? It doesn't appear ring monitor is an option in 13A. Another option I am considering is sending the number to an analog port that rings a chime that could be picked up at multiple digital phones. Of course there would also be an analog phone on the same port so the customer can use CFOS.