atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems DCS vs. Falcon sets

We currently use Falcon sets on an iDCS 100. Just want to verify before ordering that the older DCS sets are also compadible with the iDCS.

Yes, the older 12-button, 24-button, 32-button AOM, and 64-button AOM work on the i100 release 1 and 2. PM me if you want pricing on DCS sets. Like just about every dealer out there, we have hordes of the old DCS sets.

Hell send me pricing then. :thumb:

PM Sent.

The DCS keyset must be Version 1.7 firmware to work with the iDCS 100

We have old, old, old DCS sets working on the 500 release two that also runs VOIP sets.

I don't know if they are as late as 1.7 but we originally put them in with a 50 when that first came out.

Taken care of thanks everybody!

One more thing, though. At one of the stations that w're putting a DCS set on, we also want to add a 64 button AOM. I had forgotten that DCS systems reuqire their own station port or a daughterboard. There isn't a second pair available for the AOM. Are the original DCS sets compatible with a KBD-DLI board?

if you do find an older style daughter board,
The ext for the phone you put it in has to be in the 1st cab.

Not just the main cabinet but it has to be an extension on the motherboard.

What he is saying is that IF you use a daughterboard - and in his case he must due to lack of cable in place - the phone with the daughterboard in place must be on the main cabinet.