S0 Bus and Polycom equipment|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

S0 Bus and Polycom equipment #434342 05/22/09 02:41 AM
Joined: Mar 2007 Posts: 44 Lincoln, UK madadd OP Member
OP madadd Member Joined: Mar 2007 Posts: 44 Lincoln, UK	Hi all I have installed a Polycom HDX8000, I am looking to connect it to the S0 Bus of a 2bri module in a os7400. I have the polycom Quad BRI TA, however i am getting no connectivity between the to, I have set the OS Bri module to S0 Bus (exts). Has anyone connected these two before ? Is there an issue where the polycom maybe looking for ISDN timing, but the S0 bus isnt providing timings ? Adam

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: S0 Bus and Polycom equipment #434343 05/24/09 02:28 AM
Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia nameless Moderator-Samsung
nameless Moderator-Samsung Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia	I am not familiar with a 2BRI on the OS7400 as we don't have such a card here in AU, but if its anything like the 4BRI then are you connecting the Polcom to the S0 Bus ports? (labeled P1-S, P2-S, and so on) and have switched on the dip switches to enable the 50ohm terminating resistors? Done all the required programming in the MMC's?

Re: S0 Bus and Polycom equipment #434344 05/27/09 12:01 AM
Joined: Mar 2007 Posts: 44 Lincoln, UK madadd OP Member
OP madadd Member Joined: Mar 2007 Posts: 44 Lincoln, UK	Yep done it all, and still no connection

Re: S0 Bus and Polycom equipment #434345 05/27/09 12:02 AM
Joined: Mar 2007 Posts: 44 Lincoln, UK madadd OP Member
OP madadd Member Joined: Mar 2007 Posts: 44 Lincoln, UK	Sorry it is a 4BRI,

Re: S0 Bus and Polycom equipment #434346 05/27/09 04:31 AM
Joined: Jun 2005 Posts: 574 england Gerrya Member
Gerrya Member Joined: Jun 2005 Posts: 574 england	can you ring the device or even put isdn telephone in socket never had a problem my self you can put the two ports of the so bus in a group and ring them allso can you ring out of the devises dont forget you need to dial nine to get out

Re: S0 Bus and Polycom equipment #434347 06/15/09 11:04 AM
Joined: Mar 2007 Posts: 44 Lincoln, UK madadd OP Member
OP madadd Member Joined: Mar 2007 Posts: 44 Lincoln, UK	sorted this out, the bri card will not work correctly in a 7400 system when it has a 7200 second chassis and the bri is located in the second chassis. Swaped with the mgi in the primary chassis and all working fine

Moderated by nameless, pvj

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems S0 Bus and Polycom equipment