|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
First, Thank You Nameless. The centralized trunking works now. It all started because the customer wanted to dial 1+ number no 9 and had incoming DID digits in the main switch that started with 1.
Is there anyway to speed up the call completion going thru LCR? I have a modify table and I'm appending a #. The call's just seem to take 4 times as long to go out as just dialing the trunk group access code. The system is Os 7400 4.70.
Thanks,
John
John 807
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2010
Posts: 681
Member
|
|
Member
Joined: Dec 2010
Posts: 681 |
What is your LCR class for all stations? Are you using more than 1 path per LCR route?
|
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
LCR class 1 only 1 path for LCR route LCR inter digit timer 1 second.
Thanks,
John
John 807
|
|
|
|
|
Joined: Dec 2010
Posts: 681
Member
|
|
Member
Joined: Dec 2010
Posts: 681 |
Make sure that the trunk group you are using has no inactive trunks. Eg; if you are using group 803 and it has 24 trunks in there but 10 are not active, then the system will look through them all to find the first available, but if it's looking from highest to lowest and there are 5 trunks out of service, it will then look at the next one but has to scan all of those first. So that takes a few seconds to do.
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
76
guests, and
408
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
