atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Forward incoming CLI out to a mobile

Does anyone know what is involved in getting the incoming CLI to be displayed on a call forwarded to a mobile in the UK. SIP trunks. I've looked through the system programming and tried turning various things on/off, but no joy. Would I also need to ask the line provider to turn something on for this to work?

I believe in 321 you just need to clear the cli number for the extension you are forwarding. I have had some providers that will not let you forward a cli of a number you do not own though. Usually the forward would disconnect if this is the case. You can test that by changing the number in 321 to a number you don't own and try to make a call and see what cli number gets shown when you call your cell

I have just built up a 7200s with sip trunks and by default the forwarded cli is from the external caller (in Australia anyway)

But I needed to send the system SIP indial number and was able to do this in 2.6.2 turning Repeat Cli off

So to send system number, Repeat Cli off
To send Incoming caller Cli, Repeat Cli on

So playing around with these setting might help if its possible in the UK in the first place

If you run the incoming call to a dial block in vm, it will pass the incoming cli very nicely.