atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Report of all programming

I used to have a file with every programming option, and what it was programmed for, for a BCM 400. I don't know what happened to the file and I don't know what it's called, nor where to find it in the BCM. It would be very helpful if I had to re-pack a program from scratch, after a disaster, for example.

I would like to save this file for the BCM's that I currently support, especially a 450. Can anyone point me in the right direction.

Thank you.
Jim

I'm guessing it was buried in the Reports/Debug section of the web interface for 3.7 BCM's. If so, you'd probably have to retrieve it from the Linux command line on a 450 (if it still exists)

Is the choice not on the top of EM under one of the header choices?

There it is! Under the Windows menues (File, Edit, etc.), called Sessions. I looked in the EM menues, don't know why I didn't look here. (Same thing happens at home, just ask my wife.)

Thanks CurlyCord.