|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
OP
Member
Joined: Dec 2001
Posts: 352 |
I have an XTS MPB2 with an inskin card with v2.8/v9.5.7 running on it. When I try to network into it, it says its processing and trying to connect. It goes through 3 screens of thermometer loading lines before it stops and says it doesn't load.
I know the IP addresses are good because it initially connects. The data server screen on the display plugged into the card shows stuff being transferred.
Does anyone else have this problem trying to TCP/IP into it? The serial connection works just fine.
I'm trying from a 64 bit machine.
Tip and ring, the work of the devil!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I never had much luck using the admin software thru a telnet connection. The original inskin program allowed either modem or direct rs232 connection. There was no ip connection. The ip connection was there for unified messaging and DCC. I have used a digi connection that converts ip to serial...those work great.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
89
guests, and
303
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
