Topic Options
Rate This Topic
#593871 - 10/13/15 06:54 PM EVMC 5.270 software
Stix1 Offline

Moderator-Inter-Tel
*****

Registered: 06/08/10
Posts: 797
Loc: Southern California
Anyone got a copy of the EVMC 5.270 software lying around. I know it was a very buggy version but I specifically need it as part of a repair.

I looked all over the Edge and even the Inter-tel ftp to no avail.

Any help would be greatly appreciated.

Thanks!
_________________________
Inter-tel Support

Top
Comdial & Vertical
Comdial Vertical Search Enter Part Number
Comdial DX-80 7260-00 $57
#593883 - 10/14/15 05:53 AM Re: EVMC 5.270 software [Re: Stix1]
ChrisLeng
Unregistered


Is EVMC the voicemail? I have an old axxess system and my voicemail PC died with the software, no disks etc,

I'm using DB connector version 5.3.4.6 if that helps?

Top
#595736 - 12/03/15 02:28 PM Re: EVMC 5.270 software [Re: Stix1]
Cans and String Offline
Member

Registered: 10/29/09
Posts: 100
Loc: Wisconsin
I have 5.2FB.
_________________________
Inter-tel Axxess, Mitel CS/HX5000, MiVoice Office CCS/CSM, VPU, EM, ATM4, A+, CTP+, NET+, OAISYS, Audicodes, Polycom, Spectralink, NEC Red, Samsung, Mitel Call Recording, Mitel MBG, MiVoice Office, Xarios. Mitel Phone Manager

Top
#599107 - 03/22/16 07:05 AM Re: EVMC 5.270 software [Re: Cans and String]
ChrisLeng
Unregistered


What exactly does 5.2FB refer to? Are you able to send me the install files etc?

Thank You,

Top
#599124 - 03/22/16 03:24 PM Re: EVMC 5.270 software [Re: Stix1]
Cans and String Offline
Member

Registered: 10/29/09
Posts: 100
Loc: Wisconsin
OK this is going to get lengthy...

X.xxx or 5.2FB

Major Version is 5. Minor version is 2. F is the Compatibly Number between call processing and voice mail and B is the and the sequence number.

An emergency version (i.e., a post-production “patch” release that fixes a problem in the production version) takes the same format as the production version.

In the above notation,
•X begins with 1 and advances with each new major release.
•x begins with 0, advances through 9, then goes to A and advances through Z (upper case), skipping O and I (because they look too much like zero and one).
•Phase is Pre-Alpha, Alpha, and CPI. Production does not require a phase, but the version numbers remain the same.

Major Version Number:


The major version number starts at one and advances with each major release. For example, the major version is one for AXXESS 1.0, AXXESS 1.1, and AXXESS 1.000 - CPI. The major version is two for AXXESS 2.0 and AXXESS 2.000 - CPI.

Minor Version Number:


This value starts at zero at each major release begins and advances with each minor release. For example, the minor version is one for AXXESS 1.1 and AXXESS 1.100 - CPI. The minor version number is two for AXXESS 1.2 and AXXESS 1.200 - CPI.

Compatibility Number:


This value starts at zero when (1) the major version number changes, (2) the minor version number changes or (2) the product development phase changes. The compatibility number advances each time we create a frozen version that includes a database change. The compatibility number allows us to determine if the system components (Call Processing, Database Programming, and AXXESSORY Talk) are compatible (i.e., will “run” together).

Two components are compatible if they have the same major version number, minor version number, compatibility number, and product development phase. For example, 3.010 - CPI is compatible with 3.011 - CPI (as well as any other 3.01x - CPI). However, 3.010 - CPI is not compatible with any of the following versions: 2.010 - CPI (wrong major version), 3.110 - CPI (wrong minor version), 3.020 - CPI (wrong compatibility number), and 3.010 - Alpha (wrong product development phase).

Sequence Number:


This value resets to zero whenever the compatibility number resets to zero or advances. The sequence number advances when we create a frozen version that does not include database changes. Note that the three system components (Call Processing, Database Programming, and AXXESSORY Talk) will not always have the same sequence number. Each component can have a different number, and the system will still operate properly as long as the major version, minor version, compatibility, and product development phase for the components match.


You asked, I delivered. Hope this helps in your ventures,
Cans & String
_________________________
Inter-tel Axxess, Mitel CS/HX5000, MiVoice Office CCS/CSM, VPU, EM, ATM4, A+, CTP+, NET+, OAISYS, Audicodes, Polycom, Spectralink, NEC Red, Samsung, Mitel Call Recording, Mitel MBG, MiVoice Office, Xarios. Mitel Phone Manager

Top
#603649 - 09/06/16 12:34 PM Re: EVMC 5.270 software [Re: Stix1]
chrisleng Offline
Member

Registered: 09/06/16
Posts: 11
Loc: England
Wow, somehow my account seems to have been deleted?

Anyway reading that makes me think I was very lucky to randomly download the correct version of the session manager! smile (or how do I check what version phone system I actually have?)

Would anyone be able to PM this new account with a version of the EVMC software I could use?

I got very close to finding some here:
http://www.filewatcher.com/b/ftp/70.98.2...EVMC/OS2-0.html

But the host had password protected it by the time I found it frown

Top
#604424 - 10/03/16 11:58 PM Re: EVMC 5.270 software [Re: Stix1]
Ohm_Boy Offline
Member

Registered: 12/06/02
Posts: 41
Loc: Orlando, FL USA
Did you get this taken care of, or do you still need 5.270?

Top
#609301 - 03/29/17 06:41 PM Re: EVMC 5.270 software [Re: Ohm_Boy]
chrisleng Offline
Member

Registered: 09/06/16
Posts: 11
Loc: England
I still need a version of the EVMC but i'm not entirely sure which one smile

Top

Moderator:  Stix1 
Refurbished Phones & Equipment Search
TARGETED LEADS Telephone Installers, System Installation & Phone System Sales!
Technician Search, enter State or Zip Code
Shout Box

FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
IPK II firmware v 2.11
by AllyComm-Joel
Today at 05:58 PM
2 phonesystems on 1 network
by strongbrew101
Today at 05:45 AM
Tellabs Access Max
by tommyb52
04/21/17 09:00 PM
Typical cause of pop/crackle noise from paging speakers
by Tucci
04/21/17 04:27 PM
Comdial FX II VMMI not working
by Sundancekid
04/21/17 01:48 PM
Who's Online
17 registered (Arvandops, Bob3470, skip555, newtecky, AllyComm-Joel, CascadeBob, RATHER BE FISHING, hitechcomm, dexman, justbill, Carl Navarro, conxtel, hbiss, Coral Tech, hawk82, Yoda, gelehu), 266 Guests and 495 Spiders online.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
(Views)Popular Topics
Ask the person below you a game. 7661769
Pictures of ugly work II 5171784
Just for Jokester #12 1661227
Just for Jokester #13 1360606
Just for Jokester #14 1078673
New Members: Post Here 929615
Pictures of Ugly Work IV 893667
Constructive Criticism 889789
Just for Jokester #11 740152
So let's Play a Game "Who am I ?" 698785
Newest Members
TAHVAC, Moondance, Arvandops, phoneguyben, sundy58
48076 Registered Users
Forum Stats
48076 Members
59 Forums
89152 Topics
609162 Posts

Max Online: 4713 @ 04/02/14 11:57 AM
Today's Birthdays
Fire Eater, HybridRF, skajohnny, tlx, wethackrey
Top Posters (30 Days)
John807 35
hitechcomm 31
hbiss 29
dexman 23
Silversam 19
Coral Tech 18
usedphones 18
justbill 14
Arthur P. Bloom 13
oobie 13
Free Voip phone with every line!
FREE Voip Phone - Click Here!
Ad Spot #4 for sale call 1-800-766-3425
Free Phone Repair Diagnostic

Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2016




Trusted Partners
Sitemap