|
|
Joined: Apr 2007
Posts: 611 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 611 Likes: 1 |
So I changed the IP address on the 7400 with DM, and restarted. System does not start up. Looks like the lights are cycling but the MP40 MC and Run lights shut off during the boot up process. If I pull out the SD card and reinsert then lights flash a while but then shut off. Maybe corrupted SD card? Thought I will insert a new SD card and upload dbase. Good thing I Backed up before changing IP. Any ideas? Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2010
Posts: 184
Member
|
Member
Joined: Jan 2010
Posts: 184 |
I have had a couple with that problem one being just last week just swapped the SD card and it was all ok.
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
Member
Joined: Jan 2007
Posts: 1,014 |
I had that issue. Fortunately I had a recent system back up. I reset the system to factory default when it came up loaded in my backup then changed the IP address via telset. I spoke to somebody about it afterwards I can't remember if it was tech support or just another Samsung tech and was told changing the ip address via DM isn't recommended?
John 807
|
|
|
|
Joined: Apr 2007
Posts: 611 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 611 Likes: 1 |
Thanks. New SD card did the trick and luckily I backed up before the crash. Come to think of it I never change the IP via DM, I figured I was in DM to change the IP on the Svmi 20 card so what the heck. Never again.
|
|
|
Forums84
Topics94,298
Posts638,870
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
122
guests, and
317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|