|
|
Joined: Aug 2005
Posts: 908
Member
|
OP
Member
Joined: Aug 2005
Posts: 908 |
We've been experiencing "Allocating busy port" issues, which are discussed in a separate thread. A reboot of the CPS and VPU are necessary to clear the issue. The VPU reboots normally. The AVDAP service takes between 20 and 30 minutes to complete start up. I watch the AVDAP monitor during startup. There are three spots where it seems to stall. Nothing happens. I've learned it best to have a smoke, or go to the bathroom, so as not to get impatient and restart it again. After a while, the items begin to scroll again. I've had Mitel techs onsite for various reasons. They have commented about how long it takes to restart. But have not had any insights as to why or how to speed it up. We have an 80 Agent call center. You can imagine how popular I am during these periods. Do any of you have an idea to speed it up?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2009
Posts: 41
Member
|
|
Member
Joined: Aug 2009
Posts: 41 |
Is your VPU connected via RS232 or IP?
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 908 |
|
|
|
|
|
Joined: Aug 2009
Posts: 41
Member
|
|
Member
Joined: Aug 2009
Posts: 41 |
Is it an isolated network or are you sharing a LAN with other devices? I recommend putting in a switch (little 5 port) just for the system and VPU then connect the uplink port to the LAN. This will isolate the system and VPU from the LAN. Also it will let you know if the problem is broadcast etc... traffic coming from the LAN which could be delaying the sync between the VPU and System. One other thing... Have you ran a disk defragmentation tool on the VPU? (ie. disk keeper)
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 908 |
We must have VPU on the LAN. We perform automated backups. However, it has always had this problem. No, I've not run a defrag.
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 908 |
The disk is 78% free space, and a defrag is not suggested.
|
|
|
|
Forums84
Topics94,294
Posts638,833
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Yoda),
156
guests, and
332
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from wattstech.com]](http://www.wattstech.com/Mitel.jpg)