|
Joined: May 2005
Posts: 1,106
Member
|
OP
Member
Joined: May 2005
Posts: 1,106 |
I need to get some raceways that go from the drop down ceiling to the phone location... any suggestions on some good sturdy raceways?
Home Depot? Hardware Stores? others?
Kristopher
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
With drop down ceiling why not go inside the wall.
Looks much better.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
You will need a Wiremold Tele-Power pole. They are designed with two separate compartments, one for low-voltage and the other for high. They have knockouts at the bottom end that accommodate standard "keystone" jack modules and electrical receptacles.
They come in various lengths and include the necessary hardware to secure them to the ceiling grid and the floor (they have a really cool carpet gripper foot) so it's not permantent.
They cost about $125.00 each, depending upon the length you get. They come in lengths up to about 15 feet. We get them from Rexel USA Electrical supply, a national supplier, but any wholesale electrical supply will have them. You won't find these at home improvement stores.
------------------ Ed --------- How come there's always enough time to go back and fix it a second time?
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Good catch Ev.
I thought he meant next to a wall.
sorry,
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
OP
Member
Joined: May 2005
Posts: 1,106 |
i did mean next to a wall. this isnt a new building and the walls are pure concrete, where they have cash register counters about halfway down the wall. the jack needs to stop 6" above the counter for the desk phone to plug in at.
Kristopher
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
How did the ac get there and data wires to the registers.?
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
Square-D and Panduit are the choices. All supply houses. ------------------ Business Phone Systems
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
Use the power pole anyway! It can be installed in the middle of a room or up tight against a wall. There are no restrictions, and they don't require a dropped ceiling either. As long as it can be attached to something at the top end, that's all that matters.
The power compartment can always be left unused if not needed. If needs expand, it can be used for future fiber, etc. Just because it's a "power" pole doesn't mean you have to use the compartment for that specific purpose.
I guess I have to ask the obvious question, though. Why not use Panduit, Wiremold, etc. if it's just wiring coming down a wall? Maybe I need more detailed information.
------------------ Ed --------- How come there's always enough time to go back and fix it a second time?
[This message has been edited by ev607797 (edited August 26, 2005).]
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
OP
Member
Joined: May 2005
Posts: 1,106 |
i would use the same track as the a/c and data but they are in brass looking caps that run underneath the building. I asked if i could use them but they said they would have to move all of the cash registers to get to them.... im looking for a good brand to use, and where i might get them.
hmmmm. Actually, the power-pole would work on the one central register! thanks!
Kristopher
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
Member
Joined: Dec 2004
Posts: 4,096 |
The conduit in the cement would be perfect it must go to an idf someplace right. you ahve to move some equipment around anyway so why not use the same pipe as the data ?
otherwise the latch duct from anymaker will work and if you need to you can get it from any supply house like rather be fishing said
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
112
guests, and
281
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|