I have a customer that upon sending the number out on the PRI, the local carrier only outpulses the main number on the PRI. They need 10 digits coming to them, which the customer has, but they also need the outbound number to be strapped with a coding of "National". This is not to be confused with "NI2" or "National" protocol. The options you can have are: National, User, Unknown, and Subscriber. The customer is sending out "Unknown". How can the customer change "Unknown" to "National" on the outbound call setup message? The customer has the 8.2 software version and a 9109-615-001-NA PRI card installed. Thanks in advance.