|
|
|
|
Joined: Jan 2006
Posts: 11
Member
|
|
Member
Joined: Jan 2006
Posts: 11 |
I have a customer that upon sending the number out on the PRI, the local carrier only outpulses the main number on the PRI. They need 10 digits coming to them, which the customer has, but they also need the outbound number to be strapped with a coding of "National". This is not to be confused with "NI2" or "National" protocol. The options you can have are: National, User, Unknown, and Subscriber. The customer is sending out "Unknown". How can the customer change "Unknown" to "National" on the outbound call setup message? The customer has the 8.2 software version and a 9109-615-001-NA PRI card installed. Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Do you the IMAT software? That's what is required for affecting changes on the PRI card.
The protocols and transmission settings are located on the card itself, not in the Mitel PBX O/S.
|
|
|
|
|
Joined: Jan 2006
Posts: 11
Member
|
|
Member
Joined: Jan 2006
Posts: 11 |
The customer is currently upgrading their IMAT software. They are telling me the only options they have are the PRI protocol on the card software. Does upgrades usually open up other options. I find that scenario not usual.
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Take a look yourself. It supposed to be option for "Outgoing Digits" for each chanel in IMAT.
|
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (RATHER BE FISHING),
165
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
