|
|
Joined: Aug 2009
Posts: 14
Member
|
OP
Member
Joined: Aug 2009
Posts: 14 |
Hii
Got a bit of a strange one here and Mitel support have no ideas so thought I would ask here
I have 2 systems in a cluster, both are 10.0.1.23, SDS is working fine, OPS Man is controlling the telephone directory and this is working fine, When I try and dial from one system to the other the phones display INVALID. I get the same results if I dial the CEID number then the extension. I have been through the programming numerous times and 99% sure its correct. I have even reinstalled the software on both controllers and set them up with no programming other than the cluster, IP trunks and 1 phone on each controller.
Any ideas???
Thanks Joe
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,806
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (teleco, Toner),
140
guests, and
402
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|