|
|
Joined: Feb 2010
Posts: 339
Member
|
Member
Joined: Feb 2010
Posts: 339 |
You can program a port without the DLC present or if possible do a move command. A tech with Mitel programming experience should have no problems with your scenario unless the DLCs are damaged due to the corrosion you found.
The most helpful (best practice) thing to do is a cut sheet with all info on the current DLCs including physical location on terminal blocks and then the same info from where the DLCs will be relocated along with corresponding physical location on the terminal blocks.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
128
guests, and
227
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|