Has anyone run into this one....a two cabinet DSO1 with three extensions (all on the 1st Station Module on the 2nd cabinet) that intermittantly just either go "off-hook" by themselves or will make a single "beep" through the speaker?
When watching the system using a terminal and the "H-D" command the extensions in question will show "PG Ring". I've tried system resets and loosening the top screw on the amphenol connector to make sure it's not pulling away at the bottom (run into that a few times
).
I don't think it's the station module because it was working fine until we added another station module last week so we could install an NVM voice mail. Could the new module be causing problems with ports on the original module under it? The voice mail is working fine....
Timbo
