|
|
Joined: Aug 2004
Posts: 15
Member
|
OP
Member
Joined: Aug 2004
Posts: 15 |
getting the 9th line started on MICS...have core MICS and one trunk module two CI's in the core and one CI on the module...have the 1st 8 lines running fine...the station sets are fine too...and so is the call pilot....need another line...
It doesn't show up...maybe I have to put another cable to the module and run it to a wafer (66) and punch down the new 9th line onto it....originally thought it would work through the core MICS by punching down the line on the next postion
Schematic representation of the wafer block:
1122000033440000556600007788000099
Maybe you can't put 9 there.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,285
Posts638,782
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
120
guests, and
160
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|