|
|
|
|
Joined: Mar 2005
Posts: 3
Member
|
OP
Member
Joined: Mar 2005
Posts: 3 |
I shut down a CICS 4.o with a Flash 2.0 vm to relocate to a new location. It was shut down about an hour. Powered back up and tried to do a Feature 983 to make changes and it said inactive feature?
I hooked a phone up to the port, checked wiring, changed power source and all checked out fine. Then I tried a Feature 903 and it let me reset to the low range. Now when I do a F983 it prompts for admin password and justs exits after I enter it? The XXXXXX password works, but it prompts me for a key??? then exits? Any suggestions would be great
[This message has been edited by JOHNYREB (edited March 31, 2005).]
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,282
Posts638,761
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
64
guests, and
127
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
