|
|
|
|
Joined: Apr 2005
Posts: 18
Member
|
OP
Member
Joined: Apr 2005
Posts: 18 |
I've thunk myself into confussion on this.
One of my sites has discovered they can't dial 0 or 00 to get an outside operator. Here's what I have:
Station is set TGAR 1, NCOS 7, CLS=CTD
ESN for SPN 0 and 00 use RLI 12
RLI 12, entry 0 uses Route 3, FRL=3
Route 3 has TARG 2
The switchroom phone has TGAR 0, NCOS 7, CLS=UNR. It can call 0 and 00.
Is this caused by TGAR difference or CLS difference?
Can I change FRL on RLI 12 to correct it? If so, what do I change it to?
Any other thoughts.
Thanks in advance.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,307
Posts638,899
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, BforBENDETTA),
125
guests, and
150
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
