|
|
Joined: Jan 2006
Posts: 18
Member
|
OP
Member
Joined: Jan 2006
Posts: 18 |
I have a BCM 450 and a BCM 50 that I have configured on a companies network for IP Trunking between the two sites. I have the IP Trunk parameters set within both systems, as well as the IP addresses for each system programmed in the IP Trunk routing field. I have the routes built in both systems to access the VOIP Trnuks Line pool using 8 to access route 002 which is using BlocB for Voip Trunk access.
When testing and the user dials 8 to access the IP trunks it says no lines free on the phone. I have all sets programmed to access BlocB and I have double checked the routing and keycodes to make sure I have the availabiltiy. Any ideas as to why I cannot access BlocB to go out
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,299
Posts638,872
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
77
guests, and
302
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|