Creating a phantom loop on an Option 11|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Creating a phantom loop on an Option 11 #143786 06/28/09 11:34 PM
Joined: Jun 2009 Posts: 3 Currently in Okinawa redramjim OP Member
OP redramjim Member Joined: Jun 2009 Posts: 3 Currently in Okinawa	I've attempted to change an existing analog loop into a phantom loop in LD 17. I am not receiving the prompts that are laid out in the documentation. REQ: CHG TYPE CEQU DDCS TDS CONF DTDT DLOP PRI2 APVL DTI2 SYNM Any suggestions on how to fill in the other prompts after "TYPE"?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Creating a phantom loop on an Option 11	redramjim	06/29/09 03:34 AM
Re: Creating a phantom loop on an Option 11	mj_wald	06/30/09 06:16 AM
Re: Creating a phantom loop on an Option 11	Toner	06/30/09 08:05 AM
Re: Creating a phantom loop on an Option 11	mj_wald	06/30/09 12:41 PM
Re: Creating a phantom loop on an Option 11	Baron-B	07/08/09 05:11 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Creating a phantom loop on an Option 11