MIC 4.1 TO MICS 6.1|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: MIC 4.1 TO MICS 6.1 #146012 03/02/10 01:17 AM
Joined: Feb 2007 Posts: 2,473 new york, new jersey vad60 Member
vad60 Member Joined: Feb 2007 Posts: 2,473 new york, new jersey	Do you mean no 2 or 6 port expansion in slot 2? Make no difference and upgrade from 4.1 to 6.1 is straight forward by inserting Flash card in the Software cartridge. If you want to start new program I would suggest to do a Start up after system Boots up.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
MIC 4.1 TO MICS 6.1	JTELL	03/01/10 03:41 PM
Re: MIC 4.1 TO MICS 6.1	vad60	03/01/10 04:49 PM
Re: MIC 4.1 TO MICS 6.1	Alvaphonepro	03/01/10 05:09 PM
Re: MIC 4.1 TO MICS 6.1	JTELL	03/01/10 06:27 PM
Re: MIC 4.1 TO MICS 6.1	vad60	03/02/10 05:17 AM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems MIC 4.1 TO MICS 6.1