Originally posted by rich30529:
The only time NRU comes in handy for Nortel is for backup/restore and remote access. If on site the set programming is the method to use. As Jsaad stated, NRU only brings open a window with a M7310 or M7324 set. So either way, you're going to be using a set to program the system.
Actually there a three forms of programming methods for NRU. Remote set, Tree, and excel.
I agree on small deployments the tool does not help unless you are doing remote programming. However on larger deployments, with DIDs, I suggests you use the Tree programmer. This tool is immensely helpful for local programming; allowing to rapidly move from one field to another and often displaying several programming changes in one screen shot.
...check it out!
