|
|
Joined: Apr 2010
Posts: 6
Member
|
OP
Member
Joined: Apr 2010
Posts: 6 |
Hi I have a NortelT7361E. I recently started my new position so I need to delete the old employee. I managed to change the greeting but when I call someone's extention in the office it still shows the old employee name.
These are the instructions I found: To Log Into System Programming: 1. Press FEATURE XXXXXXXXXXXX 2. Enter Password: XXXXXXXXXXXXXX Display will read: " A. Configuration" Using the navigation keys, as displayed below, follow the next simple steps: 3. Press: NEXT Display will read: "B. General Admin" 4. Press: SHOW Display will read: "1. Sys speed dial" 5. Press: NEXT Display will read: "2. Names" 6. Press: NEXT Display will read: "3. Time and date" 7. Press: SHOW Display will read: "Time # # : # #" (Your current setting.
The problem is, after doing step 2, my dispaly reads Terminals & Sets. Any idea what I can do after that? Thanks vey much
Welcome to the forum. Please read the forums rules prohibiting the posting of passwords.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
107
guests, and
174
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|