MICS 7.0 XC software and CallPilot 150|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: MICS 7.0 XC software and CallPilot 150 #146573 04/23/10 07:18 AM
Joined: Feb 2005 Posts: 56 Bonita Springs, Florida USA Judy Carter OP Member
OP Judy Carter Member Joined: Feb 2005 Posts: 56 Bonita Springs, Florida USA	Marv, vad60, and CurlyCord, thank you for your suggestions. Here is what ended up being the problem. One of the 2 answering positions had CFNA. When I removed CFNA, the new tenants calls processed properly. Why it took almost 5 years for this gliche to present itself is a mystery, but at least the problem has been identified and fixed. Judy

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
MICS 7.0 XC software and CallPilot 150	Judy Carter	04/21/10 02:57 PM
Re: MICS 7.0 XC software and CallPilot 150	Curlycord	04/21/10 07:53 PM
Re: MICS 7.0 XC software and CallPilot 150	Judy Carter	04/22/10 07:39 AM
Re: MICS 7.0 XC software and CallPilot 150	telemarv	04/22/10 03:40 PM
Re: MICS 7.0 XC software and CallPilot 150	vad60	04/22/10 06:52 PM
Re: MICS 7.0 XC software and CallPilot 150	Judy Carter	04/23/10 11:18 AM
Re: MICS 7.0 XC software and CallPilot 150	russell4444	04/23/10 02:38 PM
Re: MICS 7.0 XC software and CallPilot 150	telemarv	04/23/10 02:41 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems MICS 7.0 XC software and CallPilot 150